Water hoses give your better water transporting solutions

Water hoses are used in industry, agriculture, irrigation systems and construction for water transmission. The tubes of hoses are resistant to wear and bad weather conditions. In general, they often have a smooth inner surface and a wide range of diameters and radius bends. High flexibility and compatibility with different end fittings provide the convenience of use. Safety is also guaranteed because of high quality standards. The working operation temperature ranges from -35°C to 80°C. The water hose is the most popular category of industrial hose in summer.

Water hose for 20 bar made of EPDM

This kind of water hose is made of the material of EPDM and can work in the pressure of 20 bar.

EPDM water hose for 20 bar
Water hose made of EPDM material

Three layer construction:

  • Inner layer: black and smooth EPDM with electrical conductivity.
  • Reinforcement: textile spiral construction (inner diameter is more than 25mm wrapped).
  • Outer layer: black and smooth material of EPDM, electrically conductive, resistant to ozone and atmosphere effects.
  • Operating temperature: -40°C to 95°C, the max can be up to 110°C.
  • Safety factor: 4:1.

Applications: Water hose is used for air, water and various chemicals in industry and agriculture.

Features:

  • High flexible hose with good aging resistance, weatherproof and good abrasion resistance.
  • The inner layer and outer layer of water hose are both made of EPDM rubber material which is resistant to heat, sunlight, ozone and weather.
  • The fabric reinforcement provides good flexibility.
  • Water hose adopts protection against against electrostatic discharge design, which makes the hose resistance less than 106 ohm.

Technical parameters

No. I.D.
(mm)
Wall thickness
(mm)
O.D.
(mm)
Bending radius
(mm)
Weight
(kg/m)
Length
(m/coil)
WHI-0635 6 3.5 13 72 0.15 100
WHI-0835 8 3.5 15 96 0.18 100
WHI-1035 10 3.5 17 120 0.21 100
WHI-1340 13 4.0 21 156 0.30 100
WHI-1640 16 4.0 24 192 0.35 100
WHI-1945 19 4.5 28 225 0.47 50
WHI-2550 25 5.0 35 300 0.66 50
WHI-3260 32 6.0 44 384 0.95 50
WHI-3860 38 6.0 50 456 1.20 50
Working pressure is 20 bar.

Water hose for 15 bar made of SBR or NR

Water hose used for 15 bar working pressure
Water hose for 15 bar made of SBR
  • Operating temperature: from -35 °C to +70 °C.
  • Safety factor: 3:1.
  • Inner layer: SBR / NR, black, smooth, suitable for air containing oil.
  • Reinforcement: Textile wrapped.
  • Outer layer: SBR / NR, black, smooth, resistant to abrasion with cloth impression.
  • Application: The kind of hose is designed to transport compressed air containing grease and water at an operating pressure of 15 bar. For use in industry and agriculture.

Technical parameters

No. I.D. O.D. Min. B.R. Weight Length/coil
mm inch mm mm kg / m m
WHI-15-6 6.0 1/4 12.0 90 0.16 50
WHI-15-8 8.0 5/16 15.0 120 0.18 50
WHI-15-10 10.0 3/8 17.0 170 0.22 50
WHI-15-13 13.0 1/2 20.0 200 0.22 50
WHI-15-16 16.0 5/8 23.0 270 0.52 50
WHI-15-18 18.0 18/25 26.0 260 0.40 50
WHI-15-20 20.0 3/4 28.0 300 0.62 50
WHI-15-25 25.0 1 34.0 360 0.75 50
WHI-15-32 32.0 1-1/4 43.0 420 0.95 40
WHI-15-38 38.0 1-1/2 50.0 450 1.10 40
WHI-15-50 50.0 2 64.0 550 1.70 40
WHI-15-60 60.0 2-1/2 74.0 650 2.50 40
WHI-15-75 75.0 3 91.0 800 3.30 40
Working pressure is 15 bar.

Water hose made of PVC

Water hose used for 1obar working pressure
Water hose made of PVC

This kind of water hose is made of PVC and it can be used for transmission of water as well as air. The detailed information is following.

  • Operating temperature: +1 °C to +40 °C for water, -5 °C to+40 °C for air.
  • Safety factor: 3.5:1.
  • Tube: PVC.
  • Reinforcement: synthetic yarn.
  • Outer layer: SBR, black smooth, cloth impression surface.
  • Application: hose for air and water used in construction, agriculture.

Technical parameters

No. I.D. Wall thickness O.D. Working pressure Min. Bending
radius
Weight Length/coil
air water
mm inch mm mm bar bar mm kg / m m
WHI-PVC-6 6 1/4 2.5 11 6 10 80 0.09 50
WHI-PVC-8 8 5/16 2.5 13 6 10 90 0.11 50
WHI-PVC-10 10 3/8 2.2 14.5 6 10 120 0.12 50
WHI-PVC-12.5 12.5 1/2 2.2 17 6 10 150 0.14 50
WHI-PVC-16 16 5/8 3 22 6 10 200 0.24 35
WHI-PVC-19 19 3/4 3.5 26 6 10 250 0.33 25
WHI-PVC-25 25 1 3.5 32 6 6 250 0.42 30
WHI-PVC-32 32 1-1/4 4.2 40.5 6 6 350 0.61 25

If you need to consult the price, please contact the business department by E-mail:

sales@industrialhose.org

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.